|
Coastal Passage Making graduates will have successfully demonstrated their ability to
responsibly skipper and crew an inboard auxiliary powered cruising sailboat during
passages on coastal waters, in all weather conditions, including all levels of visibility
and all hours of the day and night.
Recommended Equipment: It is recommended that Coastal Passage Making Certification courses
and examinations be conducted on 30 to 50 sloop-rigged cruising keelboats with
wheel steering and auxiliary diesel power, and with adequate equipment inventory to
complete all required certification outcomes.
Prerequisites: The prerequisites for Coastal Passage Making Certification are Bareboat
Cruising and Coastal Navigation Certifications.
Certification Requirements: Coastal Passage Making Certification requires the successful
completion of the following knowledge and skill requirements. These requirements are
expected to be performed safely with confident command of the boat, for a distance of at
least 50 nautical miles upon coastal waters, with a wind speed of at least 15 knots,
including an overnight passage.
Practical Skills
The successful Coastal Passage Making Candidate will have demonstrated a high level of
leadership and seamanship abilities while performing all of the following skills:
Preparation to Sail:
1. Inspect the vessel for the proposed passage: hull, spars, deck, rigging, hardware,
sails, engine, internal mechanical and electrical systems, head systems, fresh water systems, navigation systems,
anchoring systems, galley and provisions, and stowage.
2. Check the inventory, locate and inspect all required safety and emergency equipment,
tools and spare parts.
3. Perform the correct lashing of the life raft or dinghy, and other necessary equipment
for deck stowage.
4. Check the inventory of sails and their condition for the proposed passage, and justify
your selection based on the expected sailing conditions.
Crew Operations and Skills:
5. Demonstrate a comprehensive understanding of and correct operating procedures for such
electronic equipment as: Loran, GPS and radar.
6. Demonstrate a high level of seamanship skills.
7. Demonstrate the ability to direct the crew and make decisions to benefit the passage
goals in consideration of the weather and sea conditions, crew welfare, proper navigation
and safety.
Leaving the Dock or Mooring:
8. Develop a departure plan for the vessel and crew, and demonstrate appropriate helmsman
and crew coordination and skills for leaving the dock.
Boat Control in Confined Waters:
9. Demonstrate boat control in close quarters in adverse conditions (actual or simulated)
as you leave the harbor.
Navigation (Piloting):
10. Demonstrate the proper use of a thoroughly documented ships log.
11. Demonstrate the use of tide and current tables.
12. Demonstrate the use of the Light List and Coast Pilot.
13. Demonstrate the correct method of taking a running fix.
14. Demonstrate the use of navigational way points.
15. Demonstrate confirmation of chartwork with electronic navigation equipment such as
Loran or GPS.
16. Plot danger bearings.
Boat Control in Open Water:
17. Demonstrate leadership skills during a night passage.
18. Demonstrate command and control of the vessel under all wind and sea conditions
encountered during the passage.
19. Demonstrate seamanship skills during a headsail change.
Heavy Weather Sailing:
20. Demonstrate working on deck at night or under heavy weather conditions (actual or
simulated) while using a safety harness and jacklines.
21. Demonstrate the use of a boom preventer and explain how to overcome its inherent
dangers.
Overboard Recovery Methods:
22. Demonstrate both the Quick-Stop and Lifesling methods of overboard recoveries, both
day and night. Choose the one of the above methods that is most appropriate for the
current wind and sea conditions.
Safety and Emergency Procedures:
23. Simulate a plan of action should your vessel be in danger due to fire, water intake,
dismasting, steerage failure or other disaster. Demonstrate all safety considerations
given the situation.
Anchoring Techniques:
24. Demonstrate the ability to anchor or recover anchor while the vessel is under sail.
25. Demonstrate the ability to properly execute a Mediterranean Mooring.
26. Demonstrate the use of a tripline/anchor buoy.
Returning to the Dock:
27. Develop an approach plan for the vessel and crew, and demonstrate appropriate helmsman
and crew
coordination and skills for returning to the dock.
Securing the Boat Properly:
28. Coordinate the crew and demonstrate the stowing of equipment and cleaning of the
vessel after returning to the dock.
29. Check the vessel before leaving the dock: determine and report any required
maintenance, check docklines, spring lines and fenders, check through-hull valves, electrical system, bilge
pumps, and overall security of the boat.
Knowledge
Preparation to Sail:
1. Develop a detailed passage plan to include weather forecasts, strategies and tactics
for all potential conditions, and navigation strategies.
2. Coordinate the crew with a watch schedule and responsibilities during the passage.
Weather Forecasting:
3. Describe the progression of cloud formations, and the weather associated with each, for
both a warm and a cold front.
4. Describe the function of a barometer and barograph as they relate to weather
forecasting.
5. Explain how high and low pressure systems are formed, why they generate wind, and how
the wind is affected by geography.
6. Describe the different factors responsible for both advection and radiation types of
fog.
7. Identify at least five sources for gathering accurate weather information.
Crew Operations and Skills:
8. It is recommended that all candidates have current First Aid and CPR certifications.
9. Demonstrate a comprehensive knowledge of onboard systems and their maintenance, types
of distress flares, and the contents and stowage of an abandon-ship "grab bag".
Navigation Rules, International-Inland:
10. Be familiar with the application of all the Navigation Rules, International-Inland.
Boat Control in Open Water:
11. Describe your concerns about and reactions to the following issues: breaking waves in
inlets, shoals, bars and lee shores.
Heavy Weather Sailing:
12. Describe the causes of and your concerns about, dangerous and uncomfortable sea
states.
Overboard Recovery Methods:
13. Understand the procedures for overboard recovery in a larger cruising boat in coastal
waters under all weather conditions. Understand the Quick-Stop and Lifesling-type
overboard recovery methods under sail: constant visual contact with the victim,
communications, recovery plan, sequence of maneuvers, boathandling, course sailed, pickup
approach, and coming alongside the victim (or simulated object).
14. Describe methods of getting an overboard recovery victim back on deck after the vessel
is stopped alongside.
15. Explain when overboard recovery should be done under power.
Safety and Emergency Procedures:
16. Describe emergency procedures in the event that your vessel has been holed by a
submerged object.
17. Explain the proper procedures for protection against lightning strikes.
18. Describe the procedures involved in an air rescue operation.
Anchoring Techniques:
19. Describe an appropriate plan of action for anchoring under high wind conditions.
20. Describe an anchor watch schedule and explain the watchs responsibilities.
Returning to the Dock or Mooring:
21. Describe the difficulties and procedures of returning to the dock in adverse
conditions.
Find a
School near you Now!
|